How to Fix a Leaky Showerhead or Shower Faucet

Testing repaired shower head

A leaky, dripping showerhead is not only annoying, it wastes water. Before you call in a professional, this fairly common household problem may be relatively simple to fix by yourself (depending on the cause of the problem). Contact us if you want more information.

Fix the Showerhead

How to Clean Your Showerhead

Step 1: Turn Off Water

Shut off the water main to the whole house. Have a towel handy — your water main may be shut off, but there could still be some water left in the pipe that will come out.

Step 2: Remove and Inspect

Remove the showerhead by unscrewing it from the pipe with your hands. If the head is stuck on tight (as they often are if they haven’t been removed in a while), use pliers or a crescent wrench to unscrew it. Look at the threads inside the showerhead for a small plastic washer or rubber O-ring. It’s often the wear and tear of age on this component that can cause a showerhead to leak and start dripping. Over time, it dries out and becomes brittle which decreases its ability to hold in water. If it looks worn or damaged, replace it.


Place a towel or large rag on the shower floor to protect it from possible damage if you happen to drop a tool. Also cover the drain so that any of the small parts from the showerhead don’t accidentally go down it.

Remember not to force anything. Whether you’re taking off the showerhead or putting it back on, don’t tighten it so tightly that you damage or crack something and then need to take on a larger project.

Step 3: Clean the Showerhead

Since you have the showerhead off, now is a good time to clean out the showerhead, especially if you’ve noticed decreased flow. Oftentimes, there can be mineral deposits or sediment left by hard water on the interior of the showerhead or at the pipe stem (where the pipe connects to the showerhead). This can significantly affect water pressure and flow and can contribute to a leaky showerhead.

In a small cooking pot or pan, mix water and three cups of vinegar and bring it to a boil. Once it’s started to boil, turn off the heat. Place the showerhead (minus any rubber parts that can be removed) into the solution and let it sit for approximately 20 to 30 minutes. Then remove, rinse and scrub the inside and outside jets with an old toothbrush; do this until no deposits remain.

Step 4: Tape It Up

If the washer or O-ring looks okay or you’ve replaced it, the next step is to wrap the threads on the pipe stem with Teflon® tape. Don’t overdo it with tape though. Wrap a thin strip around the threads at the very tip of the pipe stem.

Step 5: Reattach the Showerhead

Screw the showerhead back on by hand-tightening it until you can’t turn it anymore. Then use pliers to give it a final turn. Remember not to turn too hard or you could break the showerhead or pipe.

Step 6: Turn On the Water

Turn the water back on and then run your shower for a few seconds. Turn it off. Wait a few minutes and then check to see if there still is a drip or leak.

Fix the Shower Faucet

If you’ve fixed the showerhead and a leak persists, you may have a leak in the shower faucet. Usually, this is from a worn-out washer on the shower stem, which can easily be replaced. You don’t need to call a plumber. Follow these steps to do it yourself.

Step 1: Cut Off Water

As you did with the showerhead, you will need to cut off the water supply to the shower at the water main. Next, open the faucet and let water drain out. Keep a towel on hand to soak up water that may be released from the pipes once you remove the faucet.


Because you will be standing in the tub or shower to do this project, be sure that the floor surface is dry. Any moisture could cause you to slip and fall.

Step 2: Take the Faucet Apart

How you disassemble it depends on what kind of faucet you have: one-knob or two-knob style. If you have a two-knob system then you will need to replace both valves. Use a screwdriver and crescent wrench to unscrew the valves and remove the shower faucet knobs or handles. Remove the guard and set it aside. You should see two nuts. Unscrew the larger of the two; only one of them needs to be unscrewed to reach the shower stem. Remove the shower stem by unscrewing it in a counterclockwise direction.

Step 3: Replace

5 Reasons Why Plumbing Is Important

5 Reasons Why Plumbing Is Important Image

Even from ancient times, plumbing was an important issue in the construction and development of cities. Our plumbers in London present you five reasons why plumbing is important.

1.    Use of one of the most important resources

Plumbing enables us to use safely one of the most important resources: water. This way, we can maintain our health and hygiene by using clean water, which is not a resource everybody on Earth has access to.

2.    Reduces consumption

To Reduce Climate Change, Reduce Consumption - Inside Climate News

One of the reasons why plumbing is important is that its innovations to reduce the water consumption, thus saving important resources which are used to render it hygienic and transport it, have greatly reduced the amount of water utilized by toilets, shower heads, faucets and other plumbing devices. Also, an adequate plumbing system inside a house enables us to save our money on water bills. Our plumbers in London are able to improve the plumbing system in your house.

3.    Comfort

22 Prayers for the Loss of a Loved One - Find Comfort & Peace

London plumbing enables our homes and lives to be comfortable and attractive, with modern bathrooms and kitchens being not only functional, but also relaxing spots where we can unwind at the end of a hectic day.

4.    It prevents rot and mold

A reason why plumbing is important is that correct plumbing prevents the pipes from leaking, which could cause damage to a house and the appearance of rot and mold on the walls and floors. The plumbing system in a house should be verified at least once a year in order to prevent rather than spend much more time on fixing, making sure that everything is in order before an emergency happens.

5.    Hygiene

What Types of Diseases Can Result from Poor Hygiene? | Pintas & Mullins Law  Firm

Another reason why plumbing is important is that if plumbing did not exist, our lives would be much less sanitary. We would not have to worry about fixing plumbing deteriorations, however we would have much more illnesses spread through food and other types of diseases caused by unsanitary homes.

Plumbing is without a doubt an important aspect of our lives which in the long term allows us to save a lot of expenses. All buildings, being our homes, the places where we work or malls, have some sort of a plumbing system which needs to be maintained. All the necessities of our lives, such as washing clothes, keeping us clean and cooking evolve around plumbing. In case you are experiencing any plumbing issue, our plumbers in London are ready to help. Contact us for immediate assistance.

How To Fix A Clogged Toilet

Often, we use our toilets daily without giving them much thought. However, once something goes wrong, you will most certainly take notice. Having a clogged or overflowing toilet is a fear many homeowners don’t realize they have, until it happens.

Not only can a clog cause damage to your toilet, but it can also cause expensive problems to your plumbing and home overall. Of course, not all clogs are the same. Here’s how to fix a clogged toilet.

Some clogs require the help of a pro to remove successfully. Contact a plumbing contractor today for quotes from pros in your area, for free.

What Causes A Toilet Clog

What Causes A Toilet Clog?

Toilet clogs are one of the more unfortunate events that can happen in the bathroom. They are messy and inconvenient. While most homeowners assume that a clog forms because of waste, there are many reasons you could find your toilet overflowing. Here are a few:

  • Low water flow
  • Too much waste at one time
  • Toys or other objects
  • Backup in the drain line
  • Blocked plumbing vent
  • Sewer line problems

A few of these issues you might know the answer to already but otherwise, it will take a few methods to solve the issue of the clog. For example, if you have an older toilet with low water flow, you’ll need to use less toilet paper until you can afford a replacement toilet. Other issues, like toys or other items in the toilet, need to be taken care of immediately. Here are a few steps to try:

  1. Stop the overflow
  2. Use A Plunger
  3. Try an enzyme cleaner
  4. Invest in a toilet auger
  5. Call a plumber

1. Stop The Overflow

An overflowing toilet can cause any homeowner to panic. However, this is the time you must know what to do. An overflowing toilet can cause damage to your bathroom, flooring and walls if the water seeps into them. When the toilet begins to overflow, take the lid off of your toilet and make sure the flapper is closing off more water from entering the bowl. From there, turn your water off. Make sure water stops flowing into the tank before proceeding.

Toilet overflow should be taken care of immediately because of the bacteria that can spread and damage it can cause. Mop it up as soon as possible and if you need extra help, be sure to contact a cleaning pro who can make sure your bathroom is spotless again.

If your toilet is not overflowing, this is not a necessary step to take.

Grab The Plunger

2. Grab The Plunger

The next, and most common step, that most homeowners are familiar with is plunging the toilet. However, what matters most here is the type of plunger you use. When people think of a plunger, they generally think of a sink plunger, with a cup shape at the end. However, these will not work well on toilets as they do not create suction. You’ll need to have a flange plunger on hand at all times in the home. This looks similar to the sink plunger, except the end has a lip so you can insert it right into the drain to create a better suction, hopefully removing the clog easily.

3. Try An Enzyme Cleaner

If plunging the toilet did not work, it’s time to try a different strategy. Liquid chemical drain cleaning products are often frowned upon by pros, as they can do more harm to your plumbing than good. However, a natural solution is an enzyme cleaner. These work well if you have natural waste material clogging your toilet, rather than non-flushable items that may have gotten stuck. You can get a toilet enzyme cleaner at your local home improvement store. However, you should know that this is not a quick method. Most enzymes cleaners must sit overnight to remove the clog.

Get An Enzyme Cleaner

4. Get A Toilet Auger

Finally, if nothing has worked yet, it might be time to invest in a toilet auger. These lines can reach down into the base of the toilet and because of its shape and flexibility, can maneuver into your drain removing what might be in its path.

5. Call A Plumber

When you’ve tried all of the above and yet, nothing seems to be clearing this clog, it’s time to call a plumber. It could indicate that you have a bigger plumbing problem on hand. The clog may be deeper in your pipes or there’s an issue with your sewage line. A plumber will be able to identify this and help you find a solution. The average cost to repair a toilet is $195, with most homeowners spending between $152 and $203.

Call A Plumber

Replace A Toilet

As I mentioned earlier, some toilet clogs are caused because the toilet is old and has low water flow. While you can …

How to fix a running toilet

Sometimes toilets act up. One common problem your trusty throne can develop is that it always runs. This constant flow of water is a noisy nuisance — and it’s also a money-waster that you’ll end up paying for on your next utility bill.

Fortunately, it’s usually a pretty easy problem to fix. In this guide, I’ll lay out the likeliest causes for continually running toilets, and I’ll also explain the first steps you should take to troubleshoot and solve the problem. Once you’ve successfully dealt with it, you’ll not only save some cash, but you’ll have gained the skills to tackle running toilets whenever and wherever you encounter them.

Always turn off the water before working on your toilet.

Brian Bennett/CNET

Step 1: Turn off the water

The first step is to turn off your toilet’s water supply. Usually it’s a small knob on the wall to the right of the toilet that sits close to the floor. Turn the knob all the way to the right (clockwise) to close the valve and pinch off the water supply. Doing the opposite turns the water back on.

Step 2: Remove the tank lid

Carefully remove the ceramic lid from the top of the water tank. It’s fragile, so be sure to lower it gently onto a safe resting spot like a bath towel. Now, take a look around. Inside the tank you should see all the main parts responsible for your toilet’s water control. These are the flush valve, the fill valve, and the fill tube.

Here’s a look at a toilet’s water control system. On the left is the fill valve. On the right is the fill tube, flapper, and flush valve.

Brian Bennett/CNET

The fill tube is a hollow plastic cylinder mounted vertically to the floor of the tank. One end of the tube is positioned above the tank’s water line. At the other end of the fill tube in the bottom of the tank is the flapper, the rubber or silicone seal around the drain that lifts every time you flush.

The purpose of the fill tube is to accept water from the fill valve to refill the water tank after each toilet flush. It also serves as an overflow pipe to keep water from overflowing the tank.

As the water level in the tank lowers, so too does the float in the fill valve. A lowered float opens the fill valve and lets water refill the tank. Then, as the float rises again, the water stops running once it reaches a preset level.

Step 3: Check the flapper

Sometimes a constantly running toilet is caused by a faulty flapper. If it isn’t sealing correctly in between uses, the water will gradually drain from the bottom of the tank, and the toilet will run endlessly in a futile bid to fill it back up.

To check if this is the case, press your finger around the flapper’s edges. If the toilet stops running, then your flapper has a bad seal. Next, document how the flapper connects to the bottom of your toilet. Take pictures so you have a record handy, and note the make and model of your toilet, as these details will help you to track down a matching replacement part.

Take the cap off of the toilet fill valve.

Brian Bennett/CNET

Step 4: Examine the fill valve

Fill valves can fail over time too. Dirt, debris, or mineral scale deposits can cause the valve to open randomly, making the toilet run intermittently. One quick fix for this problem is to purge the valve. My toilet’s fill valve is a Fluidmaster cup-style model. To flush it first reach into the tank with your right hand.

Next lift the float up with it resting on top of your hand. Now grip the valve cap with your left hand and rest your thumb across the cap arm. The arm juts out sideways from the valve cap. Press down on the cap while twisting it counterclockwise one-eighth of a turn. Pulling up should then release the cap.

A quick method that might fix your toilet is to flush the fill valve.

Brian Bennett/CNET

Place a cup upside down on top of the valve. Turn the water supply back on to full force. Water will then flow through the valve, clearing any debris. Do this for 10 to 15 seconds, then shut off the water. Reverse the earlier steps to reattach the valve cap. This may solve your running toilet issue. It did in my case.

Another fill valve problem is if the float is set too high. That means the water level in the tank sits above the fill tube. This causes water to constantly drain into the fill tube. It can also lead to water spilling onto the bathroom …

Water Conservation At Home

What Causes Noisy Water Pipes?

Editor’s Note: Noisy pipes are an unwelcome distraction. However, it can be hard to locate the source of the problem. To help, we’re featuring our top reasons why your pipes might be making noise one more time. Once you locate the source of the problem, it’s time to make the fix.

Kids may be loud, but your water pipes should never be noisy. Unfortunately, certain water pipes make noises due to clogs, weather, and a myriad of other factors.

See what’s causing your noisy pipes and then, connect with a local plumber to make your house quiet.

What Are Noisy Water Pipes Are Typically Caused By?

Any suspicious noise coming from your pipes can be cause for concern. But no need to panic just yet, if you find the source of the noise it can be an easy fix. Here are a few situations that may cause noisy pipes:

  1. Water Hammer
  2. Loose Pipes
  3. Worn Out Washer
  4. Main Shut Off Valve
  5. Toilets

Water Hammer

Noisy pipes can be caused by several factors. Let’s start with what is commonly known as a water hammer. Water rushing through the pipe and out the faucet moves with speed and force. When you shut off the faucet, the water flow is brought to an abrupt halt. But that energy has to go somewhere. Normally in the wall behind each hot and cold faucet is an air chamber in the pipe. It used to be about 10 inches of pipe soldered vertically.

Then, when the rushing water was stopped, it would push up that vertical pipe where it would hit a cushion of air in the pipe. That would prevent the water force from causing the pipes to rattle, or hammer. Now, there are commercial air cushions that are attached to the pipe in the same place that does the same job. Hammering can develop because over years, the air in that little vertical riser is lost, and thus the cushioning effect is lost.

How to Prevent Water Hammering

Eliminate water hammering by shutting off the main water, opening all faucets, and then draining the whole house from the lowest faucet. When you restore water, air will again be pushed into the risers designed to prevent water hammer.

Loose Pipes

Another cause of noisy water pipes is a loose pipe under the house. The flushed water moves rapidly and in large volume and can cause a pipe to sway, setting up a rattling effect.

How to Fix Loose Pipes

Drain pipes are usually suspended from the floor joists under the house and a little stabilization may be all that is needed. By crawling under the house with a flashlight while someone flushes the toilet, you should be able to find the source by listening and looking.

Worn Out Washer

A worn-out washer in a faucet or valve often causes whistling in water pipes or squeaky pipes. The direct source of this squealing is in the valves that connect to the washing machine.

How to Fix A Worn Out Washer

If you notice the squealing sound comes when the washer is on, you have an easy solution. First, shut off the valve and check the washers in the hose. Replace if they look worn or cracked. If that isn’t it, shut off the house water and repair the faucet. One of the faucet’s washers is likely worn or the valve seat is worn, causing water to be forced through a smaller opening and setting up the noisy pipes.

Main Shut Off Valve

Another source of squealing water pipes, particularly when it seems to resonate through the whole house, can be either the main shut-off valve for the house or the water pressure regulator.

How to Fix Main House Valve

For the main shut-off, turn off the water at the street valve first and then replace or repair the main house valve. If that isn’t it and you have a pressure reducer on your incoming cold water line, it may be in the reducer’s manifold.


Yet another noise problem can come from the toilet. If, after flushing, you hear a banging or rattling at the end of the filling cycle, then it is likely that the ballcock assembly, which controls the filling process, is worn.

How to Prevent Noisy Pipes from Your Toilet

Depending on the style and how new the ballcock assembly is, you might be able to repair it. Otherwise, replace it with a better one.


Loud pipes are not only annoying, but plumbing problems can also occur with noisy water pipes. Fortunately, the problems above can be fixed on your own. As always, if you need help along the way, ImproveNet can help you find a reliable and experienced plumber near you.

Looking for more plumbing tips? Read 4 Ways To Tell

10 Important Questions to Ask your New Plumber

10 Important Questions to Ask your New Plumber

Do You Really Need A Licensed Professional Plumber in London, ON? | Triton Plumbing + Service

Because plumbing contractors are specialized in certain tasks, they often charge a wide variety of prices for a wide variety of tasks. For instance, a plumber that does emergency calls typically charges a larger amount for emergency services, yet rarely performs the specific duty of conventional plumbing jobs. On the other hand, other plumbing contractors who work on new jobs require weeks or months of advance notice to do emergency services. Before you have a plumbing emergency, it’s a good idea to familiarize yourself with a local plumbing service to prevent costly plumbing problems before they happen. Use this guide to finding the best plumber by asking these 10 questions and you’ll be sure to find a reliable plumbing contractor you can count on.

Are you Licensed?

 The first question you should ask any plumber is: are you licensed? Being licensed proves that your plumber is professional enough to complete any plumbing task you throw at them. Working plumbers with enough experience are required to perform government testing that certifies them as county, regional, or state plumbing contractors. With the addition of annual re-certification tests, licensed plumbers are able to remain up to date with building codes, ensuring you hire a plumber who is knowledgeable about current building practices.

Do You Need a Licensed Plumber Las Vegas Company? | Expert Plumbers

Without a proper license, not only can your plumbing job be done in a manner inconsistent with local, state, and national building codes; it can also be illegal. Unlicensed plumbers cannot pull permits required for certain plumbing jobs, making your plumbing project against the law and susceptible to fines or being shut down.

Are you Insured?

 Besides licensing, insurance plays an important part in any plumber’s credentials. Insurance provides the stability needed when mistakes and accidents occur. While it does rarely happen, theft, accidents, and mistakes can occur, causing some big problems— especially when insurance is not present. A plumber with proper builder’s risk, bonds, and workers compensation insurance is qualified to take on any job risks without worry about them defaulting and you paying unexpected costs out of your own pocket.

What are your Credentials and References?

 A good plumber has plenty of experience. Any plumber who doesn’t have at least three to five quality references from contactable clients has probably not had enough experience to take on certain plumbing tasks reputably. Always check references out personally before getting any bids or signing any contracts.

How to Build Credentials > Savvy Cleaner

Besides references, credentials can be important as well. Credentials may not necessarily denote quality workmanship, but it does show a commitment to their trade and acknowledges they are not the only current with modern building practices and techniques, but also efficient in professional practices as well. Memberships into the Better Business Bureau, plumber unions, and local contractor organizations can also denote a commitment to their trade.

Are your Service Contractors Independently Licensed?

 Even if your plumbing contractor is licensed and insured plus has great credentials doesn’t mean the people performing the work on your house are licensed or even experienced for that matter. Always ask if the plumbing contractor will be doing the work themselves or hiring someone else to do the work for them. Asking for subcontractors’ experience and references can make certain you get the quality and professionalism you want on your plumbing project.

What are your Service Fees?

Is It Legal to Charge a Credit Card Processing Fee?

 Service fees can be accrued when a plumber visits your job for an estimate. Whether or not they perform the tasks and complete the job, many plumbers will charge a service fee just to show up at your house. This service fee is non-negotiable in most cases so always ask what your plumbers going to charge before you have them visit your home to ensure you don’t get stuck with hidden costs and fees you weren’t expecting.

What is your Typical Response Time?

Response time can be crucial in any emergency plumbing situation. Without a quick fix, plumbing leaks can quickly destroy a home, adding costs exponentially as time goes by. A plumber who’s on call 24 hours and one who shows up when they can mean the difference between a $5 washer quick fix and a $5,000 water damage disaster.

What do you Charge for Travel Time?

Many plumbing professionals charge for travel time to and from the job. This can become an especially expensive process if the plumbing contractor is very far away from your job. Hiring a local plumbing contractor is in your best interest not only for cheaper travel costs but also for a quality plumber who is knowledgeable about local codes and familiar with local building inspectors.

Do you Offer 24 Emergency services? 

More often than not, there are two distinct types of plumbing contractors— those that do 24-hour service work and those that don’t. Those who offer 24-hour services …

Your Denver Plumbing, AC, Heating, & Electrician Experts

Keep your home comfortable with help from your local Denver, CO plumbers, air conditioning, heating, and electrical professionals. Call Time Plumbing, Heating & Electric Inc. today at (303) 758-6237 to schedule an immediate appointment.

Looking for plumbing help? Need a heating or A/C expert? Time Plumbing, Heating & Electric Inc. handles it all, including electrician services. We are your local go-to resource in Denver for all of your heating, air conditioning, plumbing, and electrical needs. Our team is made up of professionals who are passionate about customer service and delivering the best solutions at the best value. Give us a call to discuss your options and to see if we are the right contractor for your needs.

What you will find is a team that is ready to serve you by working closely with you. We take the time to address your particular situation and make sure you receive a comprehensive service that meets all of your needs while exceeding your expectations.

Why Hire Us?

  •  Fixed right the first time
  •  Problem solved in one trip
  •  Competitive, flat-rate pricing
  •  No hidden fees or pushy upselling
  •  Quality products and parts available
  •  Fast service from a local company

When you work with Time Plumbing, Heating & Electric Inc. you are not just getting your problem fixed. You receive the ultimate service experience. Our friendly professionals go above and beyond to make sure you are 100% satisfied with the results before we consider the job done. There’s no problem too small or too tough for us to handle. You can count on us to arrive on time, with the right materials to get the job done as quickly and efficiently as possible. While we work fast to help you return to your normal routine, we never compromise quality; you can expect a thorough job that leaves no detail or issue overlooked.

Your One-Stop Resource For Indoor Comfort

Whether it’s a plumbing, HVAC, or electrical problem you are facing, we can handle the issue for you without any hassle on your part. Our goal is the same as yours: to get you back to whole-home comfort with minimal hassle on your part.

Time Plumbing, Heating & Electric Inc. has the knowledge and the resources to get the job done on time and at a price you can agree on. We arrive in fully-stocked trucks with the materials and products needed to complete the job as quickly as possible – in one trip, even. This way you can return to your normal routine without any further delay, and start to enjoy the comfort of your own home.

You can’t miss our flag or these savings

Our headquarters boasts the largest American flag & pole in the state of Colorado. The flag (measuring 60 feet by 30 feet) and pole (standing 154 feet tall) are dedicated to the brave men and women in uniform who have served and continue to serve, our great nation.

New Trends in Plumbing

When you think of the plumbing in your home, you may have visions of leaky, rust-stained pipes dripping endlessly in a cavernous basement. This is what many of us grew up with. However, today’s plumbing industry is much more advanced than most of us would imagine, with earth-friendly systems, technological novelties, and unique conservation methods.

Here, we’ll take a look at some of the biggest trends in the plumbing industry. Whether you’re upgrading your existing plumbing or working on brand-new construction, we hope you’ll get some great ideas.

Earth-Friendly Plumbing

This Earth Day Don't Forget Your Plumbing

There isn’t an industry that has not been affected by the “green” movement. Plumbing is no exception. This only makes sense, since wasted water is one of the biggest conservation issues.

First of all, let’s look at some appliances which can reduce your impact on the environment. The most obvious of these is the high-efficiency toilet or HET. HET’s have gotten a less-than-stellar reputation because, in years past, they were simply inadequate. Without getting graphic, let’s just say that it took several flushes to accomplish what one flush should.

Due to this unfortunate design flaw, many consumers who want to go green still shy away from HET. After all, this is one appliance which you really want to function properly! Thankfully, the new generation of HET’s is vastly superior to their predecessors. These toilets use a wide range of innovations to ensure that flushing power is more than adequate.

Perhaps the most popular variety of HET (there are four major varieties) is the pressurized flusher. These toilets make use of pressurized water instead of gravity for flushing power. This means superb performance with much less water used. In fact, compared to the seven gallons of water per flush which older toilets use, a new HET must, by law, use less than 1.28 gallons. What does this mean for you? If you have an older toilet (pre-1980) in your home, replacing it with a new HET will save you up to forty thousand gallons of water each year!

Be careful not to confuse HET with low-flow toilets. Although low-flow toilets have their fans, most experts believe HET’s to be the best of the best. Low-flow toilets are responsible for the energy-efficient toilet’s bad reputation since early models were undeniably frustrating to use.

Another thing to be aware of with HET’s is the noise. Since these toilets use different methods of moving waste, they are noticeably louder than traditional toilets. However, most consumers find that they get used to the extra noise very quickly and that they would much rather save water than have a quieter flush.

Before you install a new toilet, be sure to have a plumber check your pipes. An upgrade may be necessary to accommodate the pressure.

Greywater is a term you’ve probably not yet familiar with. It refers to gathering wastewater from your home…from sinks, washing machines, or showers…and using it for other purposes, such as flushing the toilet. This form of earth-friendly plumbing requires a significant amount of expertise to install, but the savings can really add up. Studies suggest that greywater technology may save the average household up to five thousand gallons of water yearly!

Rainwater collection is yet another method of re-purposing water. Installation is rather simple, although hooking up collection barrels to your plumbing is something that requires the expertise of a licensed plumber. Once this is accomplished, you can use this rainwater for activities that don’t require pure, clean water. Flushing the toilet is a perfect example. You’ll want to ensure that your barrels are installed correctly and are very stable; poorly installed barrels tend to tip over.

Water heaters are a big energy drain. Upgrading to a more green alternative can save you utility dollars and reduce your impact on the environment. Your options include heaters that emit very low levels of nitrous oxide (these are actually mandated by law in some areas), solar-powered heaters, and tank-less heaters which only heat water as it’s needed. Tank-less heaters are an especially good option for those who would rather use their basement as a room, such as a playroom or extra family room. Without a bulky tank, these heaters free up a lot of space.

If you’re considering a complete, full-scale plumbing upgrade for your home, seek out a plumber experienced in these matters. A centralized system that maximizes efficiency can lower your waste and your utility bills drastically. It’s also important to ensure that your plumber is aware of all the new requirements which earth-friendly plumbing entails. Extra electrical work is needed on some water heaters, and pipe size is an issue. These details seem small, but they can cause big problems if they’re not handled correctly during

Luxury Plumbing

Plumbing usually isn’t the first thing that springs to …

Five Essential Design Tips for Plumbing Renovations


Don’t be fooled – just because you can’t see it, plumbing design is a critical element of your home. The bad design causes inefficiencies and uncomfortable circumstances like cold showers and drains backups. Learn these five vital design tips and design your plumbing for optimal operation and value.

A plumbing system consists of incoming water, drainage for the wastewater, and ventilation for the gases that build up. Without those three elements working together in a well-designed system, your plumbing will be a failure. The path of the water needs to be efficient, the gases need to have a clear way out and the wastewater needs to be drained thoroughly at all times. Good plumbing design will achieve all three of those things.


Tip 1 – Follow Building Codes

Building Codes GIF | Gfycat

These guidelines have been drafted to provide protection for you, your neighbors, and the surrounding area. Within these codes, you have plenty of freedoms, but outside of them you could be in danger and risking major liabilities.


Tip 2 – Think of What Is Yet To Come

It takes courage to believe that the best is yet to c... - Robin Roberts Quote


Include future plans and possibilities in the renovation of today. What that means is that you need to design and install plumbing now that will handle the needs of the future. Include rough-ins for extra bathrooms and size your plumbing pipes to accommodate for that eventuality.

Tip 3 – Wait For an Inspection

9 Ways We Are To Wait Upon the Lord — Grace Covenant Church


As part of the building permit application your plumbing project will be subject to inspection. Take this in stride and allow your project to be looked over and assessed by a trained and certified professional. Simply following the codes is not enough; the job must be watched carefully while in progress.

Tip 4 – Different Materials Signify Different Preferences

Certain materials are generally accepted as better for certain jobs – ABS, for instance, is most often used with ventilation and in wastewater direction. Copper or PEX can be used for the incoming water, but every plumber will have a reason why they prefer one type over the other. Price, layout, and the plumbing contractor are all factors in your decision.

Tip 5 – Calculate, Then Add More

Plumbing calculations take into account the length of pipe, the direction water needs to be pumped, and the drainage location and type. In general, if a pipe travels a distance of one foot it needs to drop 1/4″ over that span for good drainage.

Once you’ve made your initial calculations, be sure to add a few clean-ups along the pipe to make it easier to troubleshoot drains and clogging.

Plumbing design is not guesswork. It takes knowledge and experience within the field, as well as the help of the local authorities to come up with the very best plumbing design. Materials can be a factor just as much as what your future renovations look like. All these elements will come together for a well-designed plumbing project that you can count on for comfort and cleanliness.…

How To Find And Hire Good Plumbers

How To Find And Hire Good Plumbers

Be it a leaky faucet or a broken water line that has water pooling around your ankles, no homeowner enjoys a plumbing emergency and the thought of having to hire a plumber to repair whatever’s gone wrong can be just as revolting for some homeowners. True enough finding reliable plumbers can be a bit of a challenge but it doesn’t have to be as bad as some of the horror stories you read out there. Read on to learn how to pre-qualify plumbers and how to ensure the plumber you hire for your repair job is a well-qualified plumber at a competitive price.




Finding Plumbers in Your Area

Before you start looking for plumbers it’s important to recognize that there are two types of plumbers. There are plumbers who handle basic repairs and plumbers who specialize in the installation of plumbing systems typically in brand new homes or remodeling projects. Before you start your search for a plumber make sure you’re looking for the right kind.

Obviously, a good place to start is by asking your friends, family, and work acquaintances. If they’ve had recent plumbing work done there’s a good chance they have a good idea about how their plumber worked and how competitively priced he was. While this is great information, there’s still some work that needs to be done if you want a good plumber at a good price. In order to get a good plumber at a good price, you’ll have to review and compare several bids from several plumbers. So while a referral from a close friend is great you should still want to see at least a couple of more bids so you can assure yourself that the plumber you end up hiring isn’t overcharging you.

To find more local plumbers in your area you can check out local home improvement stores and major plumbing materials suppliers in your area. Real estate agents can also be a good source for plumbers as they often use plumbers to make repairs on homes they are getting ready to put on the market. To round out your list you can use the TrustedPros contractor directory for several well-qualified plumbing professionals in your area.

At TrustedPros we recommend beginning with a list of at least 3-5 plumbers. We also recommend that you pre-qualify the plumbers prior to having them bid on your project. The pre-qualification process we recommend isn’t terribly intensive but it will eliminate a lot of the bad plumbers you don’t want to work with.

How To Screen And Pre-Qualify Plumbers

The key to pre-qualifying plumbers prior to having them bid is to ensure that you’re looking at comparable bids when you get to that stage of the process. There’s no point in reviewing several bids if you don’t pre-qualify the plumbers because you’ll end up comparing bids from low-quality plumbers with bids from higher quality pros that have several years in the business and who will inevitably produce estimates that are higher. That’s why it’s a good idea to pre-qualify the plumbers and ensure that they’re all of the same caliber and quality if you plan on reviewing and comparing several bids. This way you’re comparing “apples to apples” and you can focus on hiring the best plumber at the most competitive price.

One of the first things we recommend doing is checking for a license. You can easily check for a license online by doing a search for your state’s licensing board. When you get to the web page for your state’s licensing board just look for the link that says “check a license”. All you’ll need to check to see if a plumber has a license or not is the plumber’s name, business name, or license number. To obtain a state license a plumber will have to undergo a background test, the plumber will be fingerprinted and will also take a basic plumbing competency test so checking for a state license is a good place to start.

Once you’ve checked for a license we think it’s a good idea to look for existing reviews and feedback online. The easiest way to do this is by doing a Google search for the plumber’s name or business name. In the results, you want to look for websites that provide feedback or reviews from past clients. If you don’t have any luck finding any reviews in the search engine results, you can also do searches on websites like, and However, it’s best to stick with a website like TrustedPros that validates all of its user reviews prior to posting them online because not all websites that post reviews online validate them for authenticity. So although we recommend you look for …